- 42 to 66 N·m across four ratios 51:1 gives 42 N·m peak at up to 82 RPM, 81:1 gives 53 N·m at 51 RPM, and 101:1 and 121:1 both give 66 N·m at 41 and 32 RPM.
- The lighter of the two 60-frame modules Base build mass is 0.73 kg against 1.03 kg for the CRA-RI60-80, on identical torque, speed and electrical ratings.
- 10 arcsec backlash on the top two ratios Gear backlash is 20 arcsec at 51:1 and 81:1 and tightens to 10 arcsec at 101:1 and 121:1.
- 300 W electrical platform All builds run from 24–48 V at 5 A rated and 6.7 A maximum continuous current, with a 0.096 N·m/A torque constant.
- 18 mm hollow shaft Cabling passes through the joint axis instead of around it, which keeps harnesses inside a serial arm or limb.
- Three fully specified builds 72.5 mm at 0.73 kg for the base unit, 93 mm at 0.88 kg for the extended -B body, and 74 mm at 0.76 kg for the -2E-EC.
- EtherCAT on the -2E-EC build That build adds a 16/18-bit encoder option and EtherCAT alongside CAN, where the base and -B builds are CAN with a 16-bit encoder.
Description
The CRA-RI60-70 is the step above the Ti5 50-frame modules and the first in the line to offer four gear ratios: 42 N·m peak torque at 51:1 rising to 66 N·m at 101:1 and 121:1, with peak speed falling from 82 RPM to 32 RPM across that span. Bore grows to 18 mm and the platform rating to 300 W, roughly double the 50-frame's torque in a housing of similar length.
It is the lighter of the two 60-frame modules. The CRA-RI60-70 and the CRA-RI60-80 share the same four ratios, the same torque and speed table, the same 300 W platform at 24–48 V with 5 A rated and 6.7 A maximum continuous current, the same 0.096 N·m/A torque constant and the same 18 mm bore. Mass is where they part: 0.73 kg here against 1.03 kg, 0.88 kg against 1.2 kg for the extended body, 0.76 kg against 1.04 kg for the EtherCAT build. Their performance figures are identical, so the choice between the two frames is a mechanical-envelope and moving-mass decision and is confirmed with the quotation.
Three builds are fully specified. The base CRA-RI60-70-PRO-2-XXX is 72.5 mm long at 0.73 kg with a 16-bit encoder on CAN. The -B build extends the housing to 93 mm at 0.88 kg with higher rotor inertia. The -2E-EC build is 74 mm at 0.76 kg and adds a 16/18-bit encoder option with EtherCAT alongside CAN, which is the build to specify when several axes have to run on one deterministic control loop. A fourth designation, -B-2E-EC, completes the family, and its figures are confirmed with the quotation.
The module is a building block rather than a finished product: a complete joint — motor, gearing, encoder and drive electronics in one housing with a bus interface — for humanoid limbs, lightweight manipulator axes and multi-axis prototypes. The links, controller, power distribution and software around it are the integrator's work.
Key Capabilities
- 42 to 66 N·m across four ratios: 51:1 gives 42 N·m peak at up to 82 RPM, 81:1 gives 53 N·m at 51 RPM, and 101:1 and 121:1 both give 66 N·m at 41 and 32 RPM.
- The lighter of the two 60-frame modules: Base build mass is 0.73 kg against 1.03 kg for the CRA-RI60-80, on identical torque, speed and electrical ratings.
- 10 arcsec backlash on the top two ratios: Gear backlash is 20 arcsec at 51:1 and 81:1 and tightens to 10 arcsec at 101:1 and 121:1.
- 300 W electrical platform: All builds run from 24–48 V at 5 A rated and 6.7 A maximum continuous current, with a 0.096 N·m/A torque constant.
- 18 mm hollow shaft: Cabling passes through the joint axis instead of around it, which keeps harnesses inside a serial arm or limb.
- Three fully specified builds: 72.5 mm at 0.73 kg for the base unit, 93 mm at 0.88 kg for the extended -B body, and 74 mm at 0.76 kg for the -2E-EC.
- EtherCAT on the -2E-EC build: That build adds a 16/18-bit encoder option and EtherCAT alongside CAN, where the base and -B builds are CAN with a 16-bit encoder.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Ti5 Robotics |
|---|---|
| Model Family | CRA-RI60-70-PRO-2 |
| Product Type | Integrated rotary joint module (motor, gearing, encoder, drive) |
| Builds | -XXX (base), -XXX-B (extended body), -XXX-2E-EC (dual encoder, EtherCAT) |
| Further Build | -XXX-B-2E-EC — confirm at quote |
| Relation to the CRA-RI60-80 | Same ratios, torque, speed and electrical tables; lighter frame |
| Gear Ratios | 51:1, 81:1, 101:1, 121:1 |
| Peak Torque | 51:1 — 42; 81:1 — 53; 101:1 — 66; 121:1 — 66 N·m |
| Max Allowable Torque at Average Load | 51:1 — 32; 81:1 — 33; 101:1 — 49; 121:1 — 49 N·m |
| Rated Torque at 2000 RPM Input | 51:1 — 19.8; 81:1 — 27.5; 101:1 — 30; 121:1 — 30 N·m |
| Peak Speed | 51:1 — 82; 81:1 — 51; 101:1 — 41; 121:1 — 32 RPM |
| Rated Speed at Half Rated Torque | 51:1 — 68; 81:1 — 43; 101:1 — 34; 121:1 — 24 RPM |
| Gear Backlash | 51:1 — 20; 81:1 — 20; 101:1 — 10; 121:1 — 10 arcsec |
| Rated Power | 300 W |
| Supply Voltage | 24–48 V |
| Rated Current | 5 A |
| Max Continuous Current | 6.7 A |
| Torque Constant | 0.096 N·m/A |
| Encoder Resolution | 16-bit (base, -B); 16/18-bit option on -2E-EC |
| Communication Bus | CAN (base, -B); CAN or EtherCAT on -2E-EC |
| Hollow Shaft | 18 mm |
| Length | 72.5 ±0.5 mm base; 93 ±0.5 mm -B; 74 ±0.5 mm -2E-EC |
| Mass | 0.73 kg base; 0.88 kg -B; 0.76 kg -2E-EC |
| Rotor Inertia | 394.8 g·cm² base; 492 g·cm² -B; 452.3 g·cm² -2E-EC |
| Ingress Protection | Confirm at quote |
| Operating Temperature | Confirm at quote |
| Price | Quotation only |
Industries
Frequently Asked Questions
Mass. The gear ratios, torque and speed tables, backlash, electrical ratings and hollow-shaft size are the same on both; the 60-70 base build comes in at 0.73 kg against 1.03 kg for the 60-80, and its extended and EtherCAT builds are lighter in the same proportion. Their performance figures are identical, so the right frame for a given mounting is confirmed with the quotation.
Four: 51:1 at 42 N·m peak and up to 82 RPM, 81:1 at 53 N·m and 51 RPM, 101:1 at 66 N·m and 41 RPM, and 121:1 at the same 66 N·m at 32 RPM. The two higher ratios also tighten backlash to 10 arcsec.
The -2E-EC build, with CAN or EtherCAT and a 16/18-bit encoder option. The base and -B builds use CAN with a 16-bit encoder.
Mass and length are 0.73 kg at 72.5 ±0.5 mm for the base build, 0.76 kg at 74 ±0.5 mm for the -2E-EC, and 0.88 kg at 93 ±0.5 mm for the extended -B body. The -B-2E-EC figures are confirmed with the quotation.
A complete actuator: motor, gear stage, encoder and drive electronics in one housing with an 18 mm bore through the middle and a fieldbus interface. It is not a robot, and it is not a bare motor either.
It is offered by quotation. Build, gear ratio, quantity and delivery are confirmed per project, and the price is set in the quotation.
Recently Viewed
You haven't viewed any products yet.
