{"product_id":"roboparty-rp1-humanoid-robot","title":"RoboParty RP1 Humanoid Robot","description":"\u003cp\u003eThe RoboParty RP1 is the base version of the ROBOTO 01 open humanoid development platform, built for researchers and independent developers who need the hardware and the software stack rather than a sealed demonstration robot. It has 24 active degrees of freedom: five per arm, two at the waist, six per leg, and no active head joint. It weighs about 39 kg with end effectors and battery.\u003c\/p\u003e\u003cp\u003eWhat the standard RP1 ships with is deliberately plain. The head is the motion-control configuration, the end effectors are dummy hands, there is no standard visual sensor, and base computing is an RK3588; development computing is optional, with the module chosen in the configuration. It carries a six-axis IMU. That makes it the version to pick when the host project supplies its own perception, hands and compute, rather than paying for equipment it will replace.\u003c\/p\u003e\u003cp\u003eBoth ROBOTO 01 variants stand 1.35 m, with standing dimensions of 1350 x 450 x 200 mm, a 250 mm thigh, a 300 mm calf and a 550 mm single-arm length in AL6061\/7075 aluminium alloy, engineering plastics and rubber. Motion figures are shared too: up to 4 m\/s, a 30 degree climbing capability, a 50 mm maximum step and a 3 kg payload, with its split between arms and hands confirmed with the quotation. Power is a 10 Ah pack rated for three hours with a 1.5 hour charge, in a large-and-small dual-battery arrangement that allows a swap without shutting down, over USB-C or magnetic charging and with operation while charging supported.\u003c\/p\u003e\u003cp\u003eThe open-development material is the reason to choose this platform over a closed demonstrator: module and body drawings, bills of materials, interface definitions, PCB information and 3D models on the hardware side; motor drivers, gait algorithms, perception and decision models, ROS 2 middleware, an SDK, simulation environments and training code on the software side. Which repository release is current, and how complete each resource is, is worth checking before planning an implementation.\u003c\/p\u003e\u003ch3\u003eKey Capabilities\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 active degrees of freedom:\u003c\/strong\u003e Five per arm, two at the waist and six per leg, with no active head joint, on a body of about 39 kg with end effectors and battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotion-control head as standard:\u003c\/strong\u003e The base version carries no standard visual sensor, so perception hardware is chosen and fitted to suit the project.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDummy hands fitted as delivered:\u003c\/strong\u003e The wrist architecture also takes dexterous hands or grippers, and optional dexterous configurations come with 6 or 22 DOF.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRK3588 base computing:\u003c\/strong\u003e Development computing is optional, and the specific module is chosen in the configuration discussion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHot-swappable dual battery:\u003c\/strong\u003e A large-and-small pack arrangement allows a battery change without shutting the robot down, with about three hours per charge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen hardware and software stack:\u003c\/strong\u003e Drawings, bills of materials, PCB information, 3D models, motor drivers, gait algorithms, ROS 2 middleware, an SDK, simulation and training code are all published.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosed joints and redundant stops:\u003c\/strong\u003e RoboParty describes fully enclosed joints to reduce pinch exposure plus remote and wearable emergency stops with three-channel redundancy.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.\u003c\/p\u003e\u003ch3\u003eBuying through Robotix Market\u003c\/h3\u003e\u003cp\u003eThis unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.\u003c\/p\u003e","brand":"RoboParty","offers":[{"title":"Default Title","offer_id":67847203914018,"sku":"RoboParty-RP1","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/0693\/1234\/files\/roboparty-rp1_1.png?v=1794972750","url":"https:\/\/robotixmarket.co.uk\/products\/roboparty-rp1-humanoid-robot","provider":"Robotix Market Europe","version":"1.0","type":"link"}