{"product_id":"roboparty-romomo-6562-joint-module","title":"RoboParty ROMOMO 6562 Joint Module","description":"\u003cp\u003eThe ROMOMO 6562 is the small, fully specified module in RoboParty's joint-module family: 10 N·m (±5 %) rated torque, 35 N·m peak, 60 rpm rated speed against a 200 rpm peak, through a 19.5:1 reduction. Its measured prototype mass is 533.1 g and its envelope is 65 mm in outer diameter and 61.2 mm (±0.5) along the axis, with a 4.5 mm hollow bore.\u003c\/p\u003e\u003cp\u003eRated and peak figures are separate things and RoboParty says so explicitly: the peak numbers describe short-duration conditions, not continuous output. A mechanism that needs sustained torque has to be sized on the rated column together with a defined duty cycle. Further motion data: no-load speed 200 rpm (±10 %), rated power 62.8 W (±5 %) and backlash of 15 arcmin or less.\u003c\/p\u003e\u003cp\u003eElectrically it runs from 48 V at 2 A (±5 %) rated and 16 A (±10 %) peak, with 0.81 Ω line resistance at 20 °C, 0.93 mH line inductance, an 8.3 V\/krpm back-EMF constant and ten pole pairs. Feedback is dual encoders at 17 bit on the motor side and 19 bit on the gearbox side, over CAN FD or EtherCAT, and motor rotational inertia is 8.3 kg·mm². One caution: the torque constant is 2.37 N·m\/A, whereas the larger 10062's is 0.163 N·m\/A, so confirm the reference point behind each figure with the quotation before putting either into a motor model.\u003c\/p\u003e\u003cp\u003eROMOMO modules are RoboParty's own actuators, the same family used in its ROBOTO 01 humanoids. The family is built for clamp fixation and hollow cable routing through the output, with access to hardware drawings and driver source code. Hollow dimensions and mounting details vary by model and are confirmed against this module's drawing. Insulation is class F (155 °C), which is an insulation rating and not an ambient operating temperature; ingress protection and any certified safety function are confirmed with the quotation.\u003c\/p\u003e\u003ch3\u003eKey Capabilities\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 N·m rated, 35 N·m peak:\u003c\/strong\u003e Peak torque is a short-duration figure, so continuous duty has to be sized from the rated column and a defined cycle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e19.5:1 reduction, 60 rpm rated:\u003c\/strong\u003e Peak speed is 200 rpm and no-load speed 200 rpm (±10 %), both separate from the rated figure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e65 mm diameter, 533.1 g:\u003c\/strong\u003e The axial dimension is 61.2 mm (±0.5) with a 4.5 mm hollow bore, making this the compact member of the family.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual encoders, 17 and 19 bit:\u003c\/strong\u003e Feedback on both the motor side and the gearbox side, over CAN FD or EtherCAT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e48 V, 2 A rated and 16 A peak:\u003c\/strong\u003e Line resistance of 0.81 Ω, inductance of 0.93 mH, an 8.3 V\/krpm back-EMF constant and ten pole pairs complete the electrical column.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacklash of 15 arcmin or less:\u003c\/strong\u003e Rated power is 62.8 W (±5 %) and motor rotational inertia at 8.3 kg·mm² for model inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware drawings and driver source:\u003c\/strong\u003e The family offers clamp fixation, hollow cable routing, hardware drawings and driver code, with dimensions specific to each model.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.\u003c\/p\u003e\u003ch3\u003eBuying through Robotix Market\u003c\/h3\u003e\u003cp\u003eThis unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.\u003c\/p\u003e","brand":"RoboParty","offers":[{"title":"Default Title","offer_id":67847202406690,"sku":"RoboParty-ROMOMO-6562","price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/0693\/1234\/files\/roboparty-romomo-6562_1.png?v=1794972750","url":"https:\/\/robotixmarket.co.uk\/products\/roboparty-romomo-6562-joint-module","provider":"Robotix Market Europe","version":"1.0","type":"link"}